|
 
| |
Mocha 3812 (Printer Setup)
Windows XP, Win2k, Win98 Setup Guide
Following are instructions on how to connect a printer, through mochasoft.
1 . Click on this link
mw3812.exe then left click on
Run when a new window pops up.
2 . A new window will pop up, left click on setup.
3 . Left Click on Next when the program begins.
4 . Left click on Yes at the license agreement window.
5 . Left click on Install tab in the Start Installation
Window.
6 . Left click on OK.
7 . Click on start as a window.
8 . Open up Mocha Soft, and connect to your system.
9 . After logging in, hit the Escape/Attention key on your
keyboard
10. Take the option Work with Configuration
Status
11. Hit the enter key
12. In the field, Position to . . . . _________ place a P in the
field.
13. Choose a number, or letter not listed. Then go back to the
Mocha 3812 window.
14. Enter ip address of your system.
15. Place in the Device Name Field P, then the letter or number you
chose in step 13.
16. Click on Settings in the Mocha 3812 program.
17. Choose a printer from the drop down list under List of
Possible Printers.
18. Click on the box next to Matrix Printer (send ascii text) and
make sure there is a checkmark there.
19. Keep the program running, so that your printer will work!
|
