[IBS Home] [Up] [Linux] [Network Printing] [Windows CE]
|
|
|
Linux Thin ClientsTerminal Properties
My keyboard doesn't work at all, the keyboard works fine using the BOSmanager but not at the unit itself.If there is a USB mouse attached, the mouse type must be set to USB in the terminal properties or the keyboard will not work. If there is no mouse attached but is set to a PS2 (default) in the terminal properties, the keyboard will not work. Back to TopI have a TBT-350, what display or desktop options do I have and where do I change those options?It can be run in TBT (Text Base Mode), WBT (Windows Based Terminal) or Desktop Mode. The options can be found in the terminal properties under the desktop tab. Back to TopI have a USB mouse and a PS/2 keyboard. The mouse works fine but the keyboard won't work.For the keyboard to work correctly with a USB mouse you will need to select USB as the mouse type. This is set in the INPUT TAB in terminal properties set to USB and test and it the keyboard will work. Back to TopHow can I tell what version of firmware is installed on my thin client?Go to the control panel (terminal properties) on the general tab you will see the Software Version information.
Back to TopHow can I change the wallpaper/background and screensaver on the LTCs? The wallpaper/background can be changed but at this time we
don't have a way of changing the screensaver on the LTCs. Here are the steps for
setting the wallpaper:
Once you set the background on one terminal, you can "clone"
it using the BOSmanager. Back to TopMy terminal is in desktop mode how can I window my sessions?Right click down on the task bar near the time and you will see the option to window the sessions. Back to TopMy users are typing away and get a message about the maximum number of characters exceeded.They are pressing the record key (ALT F3). In keyboard mapping, remove the ATL F3 functionality and this should no longer be an issue. Back to TopHow do I configure my LTC unit for a touch-screen monitor?From the terminal properties select the input tab and select either Elotouch or ElotouchUSB.
Back to TopHow do I configure my TBT unit for a touch-screen monitor?The TBT unit does not support a touch-screen monitor. Back to TopFrom terminal properties - security tab, check to Hide connections configuration tab and check Require password to modify configuration and enter a password. Changes can be made only after the password is entered correctly and the Hide connections configuration tab has been unchecked.
Back to TopWill my LTC's clock adjust itself automatically for Daylight Saving Time this year? There is a new version of firmware for the LTCs, it is version 6.0.30 and has the fix for DST and the new RDP client. !!!!!!!!!!!!!This fix is ONLY for the 2.6 kernel and for 128MB DOM!!!!!!!!!!!!!! ftp://boswebcom.apollo.uplinkearth.com/LTC-128MB/6.0.30/ Call BOSaNOVA tech support at 866-864-5250 for the user ID and password. There will not be a fix for the 2.4 kernel. Back to Top |
|
