|
 
| |
Then change the following four fields as required.
- System name - either the internal or remote IP address or the System
serial number.
- Specify workstation ID - the 2 digit alphanumeric ID number for this
workstation
- PCs and Thin Client Displays use any combination of
the following:
A1-Az, B1-Bz, C1-Cz, D1-Dz, E1-Ez,
F1-Fz, G1-Gz, H1-Hz, I1-Iz, K1-Kz, M1-Mz
- Notebook PCs use any combination of the following:
N1-Nz
- Printers use any combination of the following:
P1-Pz
- Do
not use duplicate or existing numbers (i.e you can't have two 'P1'
printers or two 'A1' displays)!
- Set type of emulation to either a printer or a display (usually it remains a
display)
- Set displays to 27x132
[back to top] |
