[IBS Home] [Up] [Hardware Maintenance] [IBM Redbooks] [Internal Hardware] [Legacy Systems] [Power Down] [SRC Codes] [System-I Models]

Manual Shut Down from Panel

• Arrow to 02 then press ENTER
• Arrow to 02 BM then press ENTER
• Press the WHITE BUTTON
• Press the WHITE BUTTON again
• The System will shut down

Shut down from a Command Line

• type GO POWER then press ENTER
• take option 3 if you want the system to shut down and stay down
  otherwise select option 4 if you want to power off then on the system
• press F16 to confirm
• The system will power down if you selected option 3 or down and back up again if you selected option 4

Manual Power Up

Use this procedure if you manually shut down the system

• Arrow to 01 BN then press ENTER
• Press the WHITE BUTTON
• The System will power up in normal mode

Standard Power Up

Use this procedure if you lost power or shut down normally

• Press the WHITE BUTTON
• The System will power up

 

IBS Lumber and Building Material Software  Copyright © 2006 IBS Lumber Software Inc (TM)
Last modified: July 4, 2008

IBS Sales & Support (888) 427-1566
Main Office 1-812-547-4640
Fax IBS  1-812-547-9614

All pages contained in this support website are not intended for general public distribution.  Any material here can be considered private, confidential with various copyrights and restrictions against public release.  You 'the browser' cannot legally release this information for general public distribution.

IBS Webmail | IBS Corporate Site | IBS Homepage
remote support: http://www.gotomeeting.com | remote support download program