|
D1xx xxxx |
Check for a specific
D1xx SRC below. If you do not see your SRC below, then
the SRC is reporting IPL status. This is a normal
indication while the system main storage is being saved
to disk. See the
IPL SRC finder for details.
If the system is still not running
correctly after 30 minutes, contact your hardware
service provider. |
| D1xx
3xxx |
Service Processor Main
Storage Dump status reference code. This is a normal
reference code showing the status of the system when
performing a main storage dump.
You may suspect that the system is not operating
correctly when the rightmost characters do not change
for 2 minutes.
Note:
It takes approximately 1 minute to
dump each 20MB of main storage.
|
| D100
80xx |
Operations Console
error. See
Troubleshoot system reference code (SRC) data for
Operations Console. |
| D2xx xxxx |
These SRCs show the
Status of an IPL. This is a normal indication while the
panel functions and system code are powering down the
system. See the
IPL SRC finder for details, then perform
Recover from IPL or system failures. |
| D6xx xxxx |
These SRCs show the
Status of an IPL. This is a normal indication while the
system is being powered down. See the
IPL SRC finder for details.
If the system does not start normally
after 30 minutes, call your software service
representative. When xxxx is changing, the system is
doing a main storage dump. |
| D9xx xxxx |
These SRCs show the
Status of an IPL. See the
IPL SRC finder for details, then perform
Recover from IPL or system failures. |
| DAxx xxxx |
These SRCs show the
Status of an IPL. See the
IPL SRC finder for details, then perform
Recover from IPL or system failures. |
